Welcome to the help page accessories & spare parts frequently asked questions Thank you for using the online help

MXC36

MXC36

MXC36

Frequently asked questions

accessories & spare parts

Frequently asked questions

accessories & spare parts

Welcome to the help page accessories & spare parts frequently asked questions Thank you for using the online help

accessories & spare parts

assistance & FAQ's

product manual

logo H.koenig

image Jug

Jug

30,00 €

image Mixing jug lid

Mixing jug lid

10,00 €

Didn't find it? Don't panic!

image Jug

Jug

30,00 €

image Mixing jug lid

Mixing jug lid

10,00 €

Didn't find it? Don't panic!

maintenance

  • How do I clean the blender?

    The blender container must not be put in a dishwasher.
    Do not rinse the blender container in a bowl of water, as the base of the blender container is equipped with electronic components that must not get wet!

    Use a wet cloth to clean the outside of the appliance.
    Clean the blender container:
    1. Put 1 litre of water in the blender container and add a few drops of dishwashing liquid.
    If you use water containing washing-up liquid, this mixture will foam during heating and mixing sessions.
    2. Heat the water for approximately 8 minutes, after selecting the cooking setting STRONG.
    3. Briefly press the MIX button.
    4. Allow the water to cool down before cleaning the inner walls of the blender container.
    5. Clean the inside of the blender container using the special brush.
    6. Rinse the blender container with fresh water and dry it thoroughly.
    The cap and lid
    1. Clean these components in rinsing water.
    2. Rinse them with fresh water.
    3. Wipe them thoroughly.

    Did the answer solve your problem?

    No

troubleshooting

  • The food burned what to do?

    Make sure you have selected the right programme.

    Check the water or liquid level. The liquid level must be between the MIN and MAX levels.

    Be careful not to heat milk that is not suitable for the appliance and may burn.

    Did the answer solve your problem?

    No
  • The blades are blocked when the appliance is switched on.

    The selected speed is too slow, select a faster speed.

    Did the answer solve your problem?

    No
  • The device does not work.

    Check whether the plug is working with another device.
    Insert the plug correctly

    Did the answer solve your problem?

    No
  • The liquid is not mixed properly.

    There is too much (or not enough) liquid in the container, vary the amount of liquid.

    Did the answer solve your problem?

    No
  • Food is not mixed.

    Remove some of the food, then spread the remaining ingredients in the bottom of the bowl. Add water and make sure the liquid level is between MIN and MAX.

    Did the answer solve your problem?

    No
  • My appliance won't start.

    1. Pour your ingredients into the pitcher.

    2. Attach the main body of the blender to the pitcher and plug in your blender.

    By pressing one of the buttons. All the buttons will light up. Choose your programme to start the appliance.

    If the appliance emits a beep, this indicates a level problem, you must check that the water level is between MIN and MAX, otherwise the appliance will go into safety and refuse to start.

    3. 3. When the programme is finished, a noise will be heard. Remove the main body from the jug and serve.

    Did the answer solve your problem?

    No

use

We hope you have found the online help useful. Please feel free to send us your comments on this service.

Have you solved your problem? *

Did you find this service easy to use? *

Was the information given easy to understand? *

In your opinion, could we improve this service? *

We value your ideas on how to improve this service, and we will be sure to consider them.

The information collected is governed by the provisions of the law "Informatique et Libertés" of January 6, 1978 modified by the law of August 6, 2004. You have the right to access, rectify and modify data concerning you, as well as the right to oppose their processing. These rights can be exercised at any time, in particular with the company ADEVA - 8 rue Marc Seguin - Mitry-Mory