MX15

For easy cleaning we recommend that you clean the blender immediately after use.
Fill your blender with water halfway up with lukewarm water and add a drop of dish soap, activate the blender and increase the power for 10s. Then rinse the bowl with clear water and repeat the operation as many times as necessary. Finally, do not forget to clean the top of the bowl and the lid with a damp sponge.

In the vast majority of models, the base can be unscrewed, the knife assembly can be dismantled and you can clean all the elements independently (water + dishwashing product).
On some blender models, the knives do not come apart, so we advise you to fill the glass bowl with hot soapy water and run it for 30 seconds. Remove the glass bowl from the base, empty the contents of the glass bowl and rinse the bowl and its lid.
Do not allow the elements to soak. Wipe them dry after washing. Be sure to wipe your stainless steel parts thoroughly to avoid oxidation marks.

Carrot juice colours plastics: it is advisable to use a paper towel soaked in vegetable oil to reduce this colouring.

"Your robot is equipped with a security to operate, the various elements must be placed following the padlocks present on the base and the blender.

The handle bowl and the food inlet chimney on the right. The blender handle also positioned on the right. Without it, the device will not work. "

"There may be a burning smell when first used.
This is probably a "new smell" and will diminish as you use your product more often.

Also, make sure you don't run the unit for longer than the time specified in the operating instructions (1 min continuously).
"

When your hand blender is used for a long period of time without interruption, it may stop working properly.

In this case, stop using the appliance and allow it to cool for 60 minutes.

Your robot is equipped with a safety device to operate, the different elements must be placed as indicated in the instructions.
The different elements must be aligned in front of the lock symbol.

When your hand blender is used for a long period of time without interruption, it may stop working properly.
In this case, stop using the appliance and allow it to cool for 60 minutes.

Caution, the blender is not designed to pour hot liquids (over 50 °C).

When you place the Control Knob in the Pulse position, the unit will operate at maximum speed as long as you hold the Knob in this position. To have better control over your preparations, it is recommended that you use the Pulse function.