MOOTH9

For easy cleaning we recommend that you clean the blender immediately after use.
Fill your blender with water halfway up with lukewarm water and add a drop of dish soap, activate the blender and increase the power for 10s. Then rinse the bowl with clear water and repeat the operation as many times as necessary. Finally, do not forget to clean the top of the bowl and the lid with a damp sponge.

In the vast majority of models, the base can be unscrewed, the knife assembly can be dismantled and you can clean all the elements independently (water + dishwashing product).
On some blender models, the knives do not come apart, so we advise you to fill the glass bowl with hot soapy water and run it for 30 seconds. Remove the glass bowl from the base, empty the contents of the glass bowl and rinse the bowl and its lid.
Do not allow the elements to soak. Wipe them dry after washing. Be sure to wipe your stainless steel parts thoroughly to avoid oxidation marks.

Pour an appropriate amount of water into the bowl, screw on the lid and run the appliance for 5 to 30 seconds. Then discard the water.

Wipe the main unit with a damp cloth. Do not rinse, soak or spray it with water or any other liquid.

No. Do not place any part of the appliance in a dishwasher, microwave or water hotter than 60°C.

Store the appliance clean and dry, away from direct sunlight, in a well-ventilated place between -5°C and +35°C. If it is not used for a long period, recharge it every three months to help protect the battery.

Make sure all seals are correctly fitted and that the container and lid are securely screwed on before use.

"Your robot is equipped with a security to operate, the various elements must be placed following the padlocks present on the base and the blender.

The handle bowl and the food inlet chimney on the right. The blender handle also positioned on the right. Without it, the device will not work. "

"There may be a burning smell when first used.
This is probably a "new smell" and will diminish as you use your product more often.

Also, make sure you don't run the unit for longer than the time specified in the operating instructions (1 min continuously).
"

When your hand blender is used for a long period of time without interruption, it may stop working properly.
In this case, stop using the appliance and allow it to cool for 60 minutes.

The battery charge is too low. Recharge the appliance before using it again.

The safety switch is not activated. Screw the juice container on securely; when correctly installed, the MAX line must be level with the control panel.

Food pieces that are too large or too much food may block the blade. Cut the fruit into smaller pieces or reduce the amount of food, then restart the appliance.

The charger output voltage is too high. Use a USB power supply with a 5 V output.

Visit https://sav.hkoenig.com and enter your appliance model number. If the problem persists, use the support request form. Keep your proof of purchase; the H.KOENIG commercial warranty is valid for 2 years for new products.

Caution, the blender is not designed to pour hot liquids (over 50 °C).