Welcome to the help page accessories & spare parts frequently asked questions Thank you for using the online help

meat slicer

MSX250

meat slicer

Frequently asked questions

accessories & spare parts

Frequently asked questions

accessories & spare parts

Welcome to the help page accessories & spare parts frequently asked questions Thank you for using the online help

accessories & spare parts

assistance & FAQ's

product manual

logo H.koenig

image Sharp disc

Sharp disc

16,00 €

image belt

belt

10,00 €

image Blade sharpener

Blade sharpener

16,00 €

Didn't find it? Don't panic!

image Sharp disc

Sharp disc

16,00 €

image belt

belt

10,00 €

image Blade sharpener

Blade sharpener

16,00 €

Didn't find it? Don't panic!

maintenance

  • How to clean the slicer

    The cleaning of the machine must be done at least
    once a day or more frequently if necessary
    (with each change of product type), taking care to clean
    scrupulous cleaning of all surfaces in contact with
    contact with the sliced food.
    If the unit is dirty, clean it.
    If the slicer stops slicing, it may be caused by
    overheated motor, return the unit to the nearest authorized service
    to the nearest authorized service center for examination.
    It is not necessary to disassemble the blade to clean it because it can be
    the blade to clean it because it can be cleaned completely without
    disassemble it.

    Did the answer solve your problem?

    No
  • How to sharpen or change the blade of the slicer?

    If the unit does not cut well and the blade is
    the blade should be sharpened, it should be noted that the blade should only be sharpened when the cutting
    cutting capacity decreases. The gauge plate or the
    The gauge plate or the protection plate of the slicer must be closed
    by inserting the integrated sharpener during
    sharpening.
    To sharpen the blade, refer to the manual.
    The blade must be replaced when it is no longer possible to
    the blade can no longer be sharpened or when the distance between the
    the cutting edge of the blade and the blade guard is more than 6 mm.
    6 mm. Return the unit to the nearest authorized service center
    authorized service center to replace the blade.

    Did the answer solve your problem?

    No

use

  • For more information

    We talk about it here: https://meilleurs-produits-les-tests-d-axel.com/

    Did the answer solve your problem?

    No

We hope you have found the online help useful. Please feel free to send us your comments on this service.

Have you solved your problem? *

Did you find this service easy to use? *

Was the information given easy to understand? *

In your opinion, could we improve this service? *

We value your ideas on how to improve this service, and we will be sure to consider them.

The information collected is governed by the provisions of the law "Informatique et Libertés" of January 6, 1978 modified by the law of August 6, 2004. You have the right to access, rectify and modify data concerning you, as well as the right to oppose their processing. These rights can be exercised at any time, in particular with the company ADEVA - 8 rue Marc Seguin - Mitry-Mory