FLOW26

Switch off the fan, wait until the blades have stopped completely and disconnect the power supply before cleaning. Do not wet electrical components.

Stop the appliance and disconnect the power supply. Have the fixings and suspension system checked by a qualified person before using the fan again.

Do not bend the blade brackets or work on the blades while they are rotating. Disconnect the power supply before any maintenance.

No. Parts of the safety suspension system must only be replaced by the manufacturer, its after-sales service or a suitably qualified person.

Make sure nobody is near the blades and no tools or obstacles can interfere with their rotation. If you have any doubts about the fixings or wiring, consult a qualified electrician.

Check that electrical power is available and try the power control. If the fan still does not start, disconnect the power and have the installation checked by a qualified electrician.

Stop the fan immediately. Do not use it again until it has been inspected by the manufacturer, its after-sales service or a qualified professional.

Switch off the fan and wait until the blades stop completely. If the noise persists when you use it again, stop using it and have it inspected by a qualified professional.

Switch off the fan and wait until the blades stop completely before selecting the rotation direction again. If the problem persists, contact after-sales service.

Installation must be carried out by a qualified electrician on a flat ceiling, using suitable fixings capable of supporting four times the fan's weight.

The blades must be at least 2.3 m above the floor and at least 76 cm away from any obstacle.

Use the remote control to select one of the 6 available speeds, from 1 for the lowest to 6 for the highest.

Switch off the fan and wait until the blades have completely stopped before changing the rotation direction using the designated control.

The remote control lets you switch the light on or off, select fan speeds, activate natural breeze mode, silent mode and the 5-minute delayed switch-off.