Welcome to the help page accessories & spare parts frequently asked questions Thank you for using the online help

filter coffee machine with grinder

MGX90

filter coffee machine with grinder

Frequently asked questions

accessories & spare parts

Frequently asked questions

accessories & spare parts

Welcome to the help page accessories & spare parts frequently asked questions Thank you for using the online help

accessories & spare parts

assistance & FAQ's

product manual

logo H.koenig

Didn't find it? Don't panic!

maintenance

  • How to descale the machine?

    When the machine is scaled, the symbol (clock) appears on the display.
    Descale the coffee maker with a normal descaler or a mixture of water and vinegar.
    Fill the water tank with the mixture and switch on the machine. Then fill the tank with fresh, clean water up to the MAX mark and operate the coffee maker again.
    In stand-by mode, press the CALC button briefly to start the descaling process. The CALC button indicator flashes and the display shows the symbol (clock) . Press the CALC button to stop descaling after a few minutes (or during the operation). The descaling process is complete.
    Note: The buzzer beeps twice and the machine goes into standby mode when the filter paper door is not closed properly.

    Did the answer solve your problem?

    No

use

  • What type of filter should I use?

    You can use paper filters or a permanent filter. Both types of filters are commercially available.

    Did the answer solve your problem?

    No
  • How to set the clock?

    In standby mode, press the H and M buttons to display the clock setting screen.
    Use the H button to set the clock hours (in 12-hour format). Each time the button is
    you press the button, the value increases by one hour. Press and hold the button to increase the hours.
    Press and hold the button to increase the hours.
    Use the M button to set the minutes (00-59). Each time the button is pressed, the value
    value increases by one minute. Press and hold the button to increase the minutes.

    Did the answer solve your problem?

    No
  • Automatic start-up

    In standby mode, press the TIMER button to access the power-on time settings.
    The auto power-on time will flash on the display (AM 6:00 is the default setting).
    is the default setting). The clock symbol will flash on the display. Press the H
    or M button to set the switch-on time. If you do nothing within 3 seconds, the machine returns to standby mode.
    If you do nothing within 3 seconds, the machine returns to standby mode.

    Did the answer solve your problem?

    No

We hope you have found the online help useful. Please feel free to send us your comments on this service.

Have you solved your problem? *

Did you find this service easy to use? *

Was the information given easy to understand? *

In your opinion, could we improve this service? *

We value your ideas on how to improve this service, and we will be sure to consider them.

The information collected is governed by the provisions of the law "Informatique et Libertés" of January 6, 1978 modified by the law of August 6, 2004. You have the right to access, rectify and modify data concerning you, as well as the right to oppose their processing. These rights can be exercised at any time, in particular with the company ADEVA - 8 rue Marc Seguin - Mitry-Mory