MGX90

When the machine is scaled, the symbol (clock) appears on the display.
Descale the coffee maker with a normal descaler or a mixture of water and vinegar.
Fill the water tank with the mixture and switch on the machine. Then fill the tank with fresh, clean water up to the MAX mark and operate the coffee maker again.
In stand-by mode, press the CALC button briefly to start the descaling process. The CALC button indicator flashes and the display shows the symbol (clock) . Press the CALC button to stop descaling after a few minutes (or during the operation). The descaling process is complete.
Note: The buzzer beeps twice and the machine goes into standby mode when the filter paper door is not closed properly.

You can use paper filters or a permanent filter. Both types of filters are commercially available.

In standby mode, press the H and M buttons to display the clock setting screen.
Use the H button to set the clock hours (in 12-hour format). Each time the button is
you press the button, the value increases by one hour. Press and hold the button to increase the hours.
Press and hold the button to increase the hours.
Use the M button to set the minutes (00-59). Each time the button is pressed, the value
value increases by one minute. Press and hold the button to increase the minutes.

In standby mode, press the TIMER button to access the power-on time settings.
The auto power-on time will flash on the display (AM 6:00 is the default setting).
is the default setting). The clock symbol will flash on the display. Press the H
or M button to set the switch-on time. If you do nothing within 3 seconds, the machine returns to standby mode.
If you do nothing within 3 seconds, the machine returns to standby mode.